When you plug in your Netgear AC1750 router, the power LED on it will blink orange for a few seconds and turn green shortly. But, what happens if the router’s power LED remains orange and doesn’t turn green? To fix the issue, you have to ensure that you have performed the Netgear AC1750 setup in a successful manner.
What? You have configured the router in a successful manner but getting the same orange light issue? No worries! This post will help you. Here, you will get 5 tips following which troubleshooting the issue will be a walk in the park for you. Keep reading!
Fixed: Netgear AC1750 Orange Light
Fix 1: Check Your Internet Connection
You may see an orange light on your Netgear AC1750 router if the internet connection is poor. To fix this, all you have to do is contact your ISP. Yes, your ISP could fix the slow internet connection issue for you.
Once everything gets fixed from your ISP’s end, ensure to connect your Netgear AC1750 router and modem firmly using an Ethernet cable. The use of a damaged Ethernet cable is not recommended at all. By any chance, if you don’t have an Ethernet cable, then the connection between the devices can also get established using a wireless source.
Now, you have to check the connection between the devices whether has been successfully made or not by accessing the router login page.
Fix 2: Check Router’s Power Supply
Your Netgear AC1750 router should receive a sufficient power supply from its respective wall outlet. Change the wall plug in case it is damaged. But, don’t do the mistake of using a damaged wall plug.
Fix 3: Reboot Your Netgear AC1750
Power cycling (rebooting) your Netgear AC1750 router will help you troubleshoot the orange light issue for you. To do so, follow the instructions provided below:
- First of all, you have to disconnect your Netgear AC1750 from the internet modem.
- Then, turn off your Netgear AC1750 router.
- Wait for a few minutes.
- Plug your Netgear AC1750 router back in.
- The power LED on your router will start blinking green. Wait for a few seconds for the LED to become stable.
As soon as you are done rebooting your Netgear AC1750 router, check if the orange light issue is fixed or not.
Fix 4: Update Netgear AC1750 Firmware
If none of the troubleshooting tips resolve the Netgear AC1750 router orange light issue for you, then the reason behind it can be outdated firmware. If your Netgear router is still working on an outdated firmware version, update it right away.
In order to update your Netgear AC1750 router firmware, navigate to its dashboard using 192.168.1.1 IP and apply the on-screen instructions.
Your Netgear AC1750 router will reboot itself once the firmware update process gets completed. To prevent the firmware update failed issue, we strictly recommend not interrupting the Netgear AC1750 firmware update process in between.
Fix 5: Reset Netgear AC1750 Router
Now, can we hope that after updating the Netgear AC1750 router’s firmware, you are not seeing an orange LED on the device? If not, then opt for resetting your Netgear AC1750 router. To execute the reset process, disconnect Netgear AC1750 from your internet modem. Once you are done, locate the reset hole on it (Netgear AC1750). Once found, press it.
Your Netgear AC1750 router resets successfully. Now, perform the Netgear AC1750 setup process from scratch using the default router login username and password.
Done! The Netgear AC1750 router orange light issue has been fixed. You are all set to avail your device’s features. Enjoy!