Linksys Velop routers are one of the most amazing wireless devices that have taken the networking world to new heights. They offer astonishing features that improve the user’s internet experience. One such feature is Bridge Mode. After setting up your Linksys Velop router in bridge mode, you will be able to extend the WiFi network of your existing gateway or access point. In this article, you will learn how to login to Linksys router and configure it in the Bridge Mode. But before that, let us shed some light on the prerequisites for doing so.
Prerequisites: Linksys Velop Bridge Mode
- An already configured Linksys Velop router.
- The latest version of the Linksys app.
- The default username and password of your Velop Linksys router.
After you get access to the aforementioned things, head over to the process to configure your Linksys Velop in Bridge Mode.
Steps to Configure Linksys Velop in Bridge Mode
- Launch the Linksys App
Commence the process of setting up your Velop router in Bridge Mode by launching the Linksys app. If you’re not using the latest version of the Linksys app, consider updating it. For this, navigate to the Google Play Store, select the Settings, and update the Linksys app by tapping the Update button.
Note: If you are an owner of an iOS device, the Linksys app can be updated by navigating to the App Store.
- Log in to Your Velop Router
The next step is to log in to your Linksys Velop router. So, enter the default Linksys router login credentials into the given fields and tap Log In. Remember that the default Linksys Velop username and password are case-sensitive. So, you can’t afford even a single typo. Also, turn the Caps Lock option on the keyboard off while logging in to your Linksys Velop router.
Just in case you’ve changed the default login credentials of your Velop router, consider using them. It will help you avoid technical issues amidst the process of setting up your device in Bridge Mode.
- Change the Connection Type
Once you tap the Log In button, you will be taken to the Linksys Velop dashboard. Here, tap the Menu icon and look for the Advanced Settings option. Once found, select it and tap the Internet Settings option.
Now, tap the Connection Type option. Thereafter, switch the connection type to Bridge Mode. Tap the Save button. Find the Enable Bridge Mode option and tap it. After changing the settings, your client devices might disconnect temporarily and notification regarding the Bridge Mode will pop up on your mobile device.
In this way, you can set up your Linksys Velop router in Bridge Mode. Just in case, you are unable to do so, refer to the troubleshooting tactics jotted down below.
Fixed: Can’t Set Up Linksys Velop in Bridge Mode
- Is your Linksys Velop router getting the fluctuation-free power supply? Probably not. To confirm this, check whether it is plugged into a working wall outlet or not. If not, then either get the current power source repaired or use another one to power your Linksys Velop.
- The connection between your Linksys Velop router and the existing modem should not be weak while setting up your WiFi device in Bridge Mode. If you’ve connected your WiFi devices using an Ethernet cable, ensure that it is damage-free. If not, replace it with a new cable. However, if a wireless source is being used, make sure that your WiFi devices are placed at a safe distance.
- Check whether the firmware of your Linksys Velop node is updated or not. If not, then consider updating it before you execute the steps to configure the Linksys Velop in Bridge mode.
- Ensure that no device in your home network is placed in the WiFi interference zone. It means the Velop router should be away from corners, concrete walls, mirrors, fish tanks, metal doors, aluminum studs, etc. Do not forget that devices and appliances like microwave ovens, cordless phones, refrigerators, televisions, baby monitors, Bluetooth speakers, etc. also tend to interrupt the router’s WiFi signals.
- The mobile device being used to configure the Linksys Velop router in Bridge Mode shouldn’t be accumulated with infected files.
Wrap Up
No matter whether you have performed Linksys Velop AX4200 setup or owns any other Velop model, the aforementioned guidelines will help you in setting it up in the Bridge Mode. If you liked reading this post, then feel free to express your thoughts in the comment section.