Linksys extender yellow light is one of the most common yet major issues experienced by every 3rd Linksys extender user. Chances are Linksys WiFi extender setup process is left incomplete or a wrong firmware version is downloaded on your device and due to this, you are getting the yellow light issue.
But, you don’t have to worry at all! In this article, we will provide you with one of the best fixes that will help you troubleshoot “Linksys extender yellow light” issue in minutes.
Let’s dive in!
Folks! First, we will provide you with all the possible reasons behind getting the “Linksys extender yellow light” issue. Will that be fine? Don’t worry! We will also provide you with the solutions along so that it will be easier for you to troubleshoot the issue.
Reasons Along With Solutions
Reason 1: Chances are that the distance between your existing router and the Linksys extender is too much and due to that, you are getting the issue.
Solution: To get the issue fixed, try moving your Linksys extender and router closer.
Bonus: Linksys spot finder will help you to choose the correct location for your devices. If your Linksys WiFi extender is placed too far or too closely from your existing router, the spot finder technology will help you find a better location.
Reason 2: The second reason could be due to the corrupted or wrong firmware version. Another reason could be that you are ignoring firmware updates.
Solution: So, if you want to get the issue on the fly, visit the firmware update page using http://extender.linksys.com web address, and download the correct version on Linksys extender as per the model you have.
On the off chance if you have updated the firmware on your Linksys extender and you are still getting yellow color LED on it, then it’s better to reset your device back to factory default settings. Once you reset the Linksys extender, perform the Linksys WiFi extender setup again, and reinstall the firmware version as per the device model you have.
Wondering how to reset, reconfigure, and reinstall the extender’s firmware? Wonder no more! We are here! Keep scrolling down to grab the steps!
Reset Linksys WiFi Extender
Step 1: First things first, you have to disconnect all the devices that are currently connected to Linksys extender setup-xxx.
Step 2: Find the reset hole on your Linksys extender. Once found, press it using a pen or a paper clip.
Step 3: Hold it reset the hole and release it when the power light on it starts blinking green.
Note: The “Linksys extender yellow light” issue has been solved by just resetting it. But, don’t think that the issue is resolved then what is the purpose of reconfiguring or reinstalling the firmware. If you are about to do this, then let us tell you that you are inviting many big issues along with the “Linksys extender yellow light” issue.
So, after resetting the Linksys extender, it will be as crucial as breathing for you to reconfigure the Linksys extender and reinstall the firmware on it.
Linksys WiFi Extender Setup
Step 1: Connect your Linksys WiFi extender and router using an Ethernet cable or you can also connect them in a wireless manner.
Step 2: Open a web browser of your choice on a PC or laptop.
Note: Make sure that you have access to Linksys extender setup-xxx.
Step 3: Enter http://extender.linksys.com in the address bar.
Step 4: You will be taken to the Linksys WiFi setup page.
Step 5: Follow the on-screen setup instruction.
In the blink of an eye and the Linksys WiFi, the extender setup process is completed already.
Folks! Before we provide you with the important steps to update Linksys extender firmware, there is one important thing that we would like to say. There isn’t any doubt that the Linksys spot finder technology will help you choose a better location for your devices, and this we have already mentioned above. But, it (the spot finder technology) will not work if your existing router is not compatible with the Linksys device. And, if your router is not compatible with your Linksys extender, then it will give you:
- Yellow light issue
- Linksys WiFi extender setup issue
- Issues while updating Linksys extender firmware, and so on.
So, in that case, we suggest you replace your existing router with Linksys, configure it using Linksys router login IP, and see the difference. And, if your existing router works well with your Linksys extender, then there is no need to replace it. Just follow the tips provided in this post to troubleshoot “Linksys extender yellow light” issue.
Now, proceeding further, let us provide you with the steps to update Linksys extender firmware.
Update Linksys Extender Firmware
Step 1: Navigate to the official site of your device.
Step 2: As per the Linksys extender’s model number you have, follow the on-screen instructions, and update the correct and latest firmware version.
Note: Don’t do the mistake of interrupting Linksys extender firmware update process. This means, do not turn off the extender, don’t try to go online, do not restart your Linksys device, do not get disconnected from Linksys extender setup-xxx, and your existing router.
In a Nutshell
By following the troubleshooting tips provided in this article, fixing “Linksys extender yellow light” issue will be as similar as a five-finger exercise for you.
Also Read: Education Metaverse