Netgear is leading the WiFi industry by providing remarkable and high-performing routers and extenders. There are a wide number of models offered by the company to match the WiFi needs of people around the world. Although all the products by Netgear are going beyond the expectations of users, however, some users are seen struggling with the Nighthawk router not working issue, these days.
If you are also struggling with the same issue and looking to get an instant fix for it, then this troubleshooting guide can be of great help to you. So, without any further ado, check the steps given in this post and make your device up and running in no time.
Fixed: Netgear Nighthawk Router Not Working
There could be various reasons making your Nighthawk router non-performing. However, with the implementation of a few hacks, all these issues can be resolved and you can get your router back to work.
- Power Cycle Your Router
The very first thing you need to do is power cycle your router. Perhaps, there is a technical glitch with your device, making it not work. For beginners, the process of power cycling a router is super easy.
You just need to give some break to your router by unplugging it from its power socket. Once done, try to access the Netgear router login page and check if your device is now working fine or not.
- Cross-check Power Supply
Another possible reason that can make you experience the Nighthawk router not working issue could be a gap in the power being supplied to your device.
Thus, check the socket to which your router is plugged. Make sure the socket is working fine and offering power without any fluctuation. If you find the socket not working properly, consider installing the power adapter of your Nighthawk router to a different socket.
- Keep WiFi Interference Away
You may fall into the problem of the Netgear Nighthawk router not working issue if your device is placed near things or appliances emitting radio waves. As a result, you need to keep your Nighthawk away from WiFi interference causing things.
Bluetooth speakers, microwave ovens, baby monitors, refrigerators, and cellular phones are to name a few which can hinder the working of your Nighthawk router.
- Update Nighthawk Firmware
The issue you are currently dealing with could be the result of outdated firmware. If you have not updated your router for a long time, then it’s time to do it now.
For updating the firmware of your Nighthawk, download the latest version of the firmware as per your router’s model from the official site of Netgear. Once done, access the Nighthawk router login page and update the firmware version of your device.
- Change Location of Your Router
If you have placed your Nighthawk router in a congested area, then also you may have to deal with the Nighthawk router not working issue.
The location of the router must be selected wisely. Not only do you need to keep your router away from WiFi interference but also check if it is within the range of your modem. Apart from that, do not bury your router inside a cabinet or under a table. Instead, give it some space in the open to breathe properly. The preferred location to place a router is the central area of your home and over a higher surface.
- Reinstall Your Nighthawk
Lastly, you may get into the mess of the Netgear Nighthawk router not working issue if the device is not configured correctly.
In such a situation, you need to restore your Nighthawk to its factory settings and then install it again from the scratch.
If you don’t know how to reconfigure a Nighthawk router after resetting it, then the below section could be of some help.
How to Reinstall a Nighthawk Router?
- Connect the router to your modem. The connection can be made either using a wire or in a wireless manner.
- Plug the adapter of the Nighthawk router into a socket and turn on the power button.
- In a while, you will find your router has started glowing green.
- This is the time when you need to launch a web browser on your PC.
- Type routerlogin.net in the address field and hit Enter.
- Login page of your Nighthawk router displays.
- Enter default credentials and click Log In.
- Netgear Nighthawk setup wizard will open prompting various instructions.
- Follow the given instructions and complete the reinstallation process of your Nighthawk router.
With that, our guide on fixing the Netgear Nighthawk router not working issue ends here. Let us know your feedback about the post in the comments section.