TP Link extender WiFi keeps cutting out issues has affected the surfing experience of a number of users worldwide. Fortunately, this annoying issue can be easily fixed by following the TP Link troubleshooting tips mentioned in this article. So, without much ado, keep scrolling down.
TP Link Extender WiFi Keeps Cutting Out
Check the Ethernet Connection
The very first fix that you have to try to fix “TP Link extender WiFi keeps cutting out” issue is to check the Ethernet connection you have made between your devices. The connection must be secure and strong enough.
Apart from this, we suggest you have a look at the Ethernet cable you are using. It shouldn’t be worn out or dusty. In case of a damaged Ethernet cable, swap it with a brand new one right away.
If you are a lazy bud and don’t want to go out in the market for a new Ethernet cable, then you can connect the devices in a wireless manner.
Relocate Your TP Link Extender
Chances are that you have kept your TP Link WiFi extender on a congested, lower, or dirty place. Besides, there are also possibilities that the extender has been kept in an area/ location that is surrounded by interference-creating WiFi obstructions like reflexive surfaces, electronic appliances, WiFi devices, and so on. Well, such things can interfere with your extender’s WiFi signals, resulting in “TP Link extender WiFi keeps cutting out” issue.
To cope with the issue, we suggest you relocate your TP Link WiFi extender right away. Place it at the center-most, higher, and clean area in your home, probably away from the interference-creating obstructions listed above.
Put Your Extender and Router Closer
There is a possibility that you have to keep your TP Link WiFi extender and your existing router away from the reach of each other and due to that, you are getting “TP Link extender WiFi keeps cutting out” issue. So, to get the most out of your extender’s WiFi, place your devices closer.
After pulling your extender and router closer, we suggest you access tplinkrepeater.net login, just to check if the WiFi is still cutting out after applying this tip.
Power Cycle Your Extender
If you are still struggling with “TP Link extender WiFi keeps cutting out” issue despite following the TP Link troubleshooting tips listed above, then it is probably because of the overheated and tired range extender. In that case, we recommend you to power cycle or restart your TP Link WiFi extender right away. Doing so will give your range extender a fresh start and also allow him to cool down completely.
Here’s how to power cycle your TP Link extender:
Step 1: Disconnect your TP Link extender and router.
Step 2: Once done, power off your range extender and wait for a few minutes.
Step 3: A few moments later, turn the extender back on.
Step 4: Connect the extender and router.
Check the WiFi connection after power cycling the extender by accessing tplinkrepeater.net login page.
Reconfigure Your TP Link Extender
Still, getting the same error? It seems like you haven’t configured your TP Link extender in a proper way and due to that, you are getting “TP Link extender WiFi keeps cutting out” issue. To get the issue fixed, you need to reset and reconfigure your TP Link extender by accessing its setup page by using http://tplinkrepeater.net web address.
Bonus: If http://tplinkrepeater.net web address does not allow you to access TP Link WiFi setup page, then you can also use 192.168. 0.254 IP instead.
Update the Firmware
An outdated firmware version on your TP Link WiFi extender also leads you to experience the issue. In that case, we suggest you update the firmware of your range extender to the latest version. Visit the official site of your device and update the firmware version as per the model you have.
To Wrap Up
This was all about our article to fix “TP Link extender WiFi keeps cutting out” issue. We hope that the fixes we have provided above had helped you to make the most out of your WiFi network. Feel free to drop a word of your feedback.