Many users struggle with the D-Link DAP-1520 setup process because they prefer connecting their extender and router using a wireless source. Are you unable to configure your device because of the same damn reason? If you are nodding your head in yes, then worry not. We have got you covered.
In this post, we have mentioned the step-by-step guidelines that will help you set up a D-Link DAP-1520 extender using an Ethernet cable in a hassle-free manner. So, read on.
Steps to Perform D-Link DAP-1520 Setup
Turn On Your Extender
Start the D-Link DAP-1520 setup process by plugging your wireless range extender into a working wall socket. Press the power button on your extender and wait for the LED to turn a shade of green.
Connect Your WiFi Devices
Once the LED on your D-Link wireless extender turns green, grab hold of an Ethernet cable. Connect one end of the Ethernet cable to the extender and another to your existing router. Make sure that the connection between your WiFi devices is not loose.
Launch an Internet Browser
The next step in line is to open an internet browser on your PC. Once you are done, type the default web address of your D-Link DAP-1520 wireless extender into the address bar of your browser and press the Enter key to proceed further. You will get welcomed by the D-Link extender login page.
Perform D-Link Extender Login
When prompted, input the default username and password of your D-Link DAP-1520 extender. Follow the on-screen prompts to complete configuring your D-Link wireless range extender.
If you follow these instructions carefully, you will surely be able to perform D-Link DAP-1520 setup using an Ethernet cable. On the off chance, you get stuck at any point; you can take the help of the below-mentioned troubleshooting steps.
Can’t Perform D-Link DAP-1520 Setup Successfully?
Here’s What to Do:
Ensure Proper Power Supply
Start by checking whether your D-Link DAP-1520 extender is getting an adequate and fluctuation-free power supply from the wall socket or not. If not, consider plugging your wireless range extender into another wall outlet.
Verify the Ethernet Connection
If the Ethernet cable connecting your D-Link DAP-1520 extender and the existing router is worn out or damaged from anywhere, it is recommended that you get it replaced with a new one immediately.
Read More – Dlinkap.local Not Working? Let’s Fix It!
Check the Web Address
Maybe you weren’t careful while using the default web address to log in to your D-Link DAP-1520 extender. Therefore, the next time you use the default web address, keep the following things in mind:
- Do not enter the default web address in the search bar of the web browser. Instead, type it in the address bar.
- Avoid typing errors.
- Do cross-check whether you have typed the correct web address or not before hitting Enter.
Note: You can also use the default IP address to log in to your D-Link DAP-1520 extender.
Do Not Enter Wrong Login Details
If you are not sure about the default username and password of your D-Link DAP-1520 extender, avoid entering them. First, refer to the user manual, confirm the admin details, and then use them to access the D-Link DAP-1520 setup wizard.
Reboot Your D-Link Extender
If even after following the aforementioned troubleshooting tips, you are not able to configure a D-Link DAP-1520 extender, reboot it.
Here is how you can reboot your wireless device:
- Power off your D-Link DAP-1520 extender and unplug it from the wall socket.
- Wait for a few seconds.
- Thereafter, plug your D-Link device back into the wall socket and turn it on.
Hopefully, these troubleshooting hacks will help you resolve the D-Link DAP-1520 setup issues once and for all.
Our guide to perform D-Link DAP-1520 setup has come to an end here. If the aforementioned steps helped you finish the process, connect your WiFi-enabled devices to the network of the extender and gain access to a blazing-fast and seamless internet connection.