In this article, we are going to provide you solutions to prevent Netgear Orbi from disconnecting frequently. So, without much delay, let’s get the ball rolling!
There can be a number of reasons behind Netgear Orbi keeps on disconnecting issue. So, first of all, we will begin with the reasons. Will that be ok? Don’t worry! We will also provide the solutions along. Hop on!
Reason 1: Bad Internet Connection
If your Netgear Orbi keeps on disconnecting, then it can be due to bad or poor internet connection.
Solution: Check the internet connection. Contact your internet service provider for the same. On the off chance if you are getting excellent data speed, then it is ok. If not, then please ask your service provider to improve your internet speed by upgrading your data plan.
Reason 2: Faulty Firmware on Orbi
Chances are that you have either updated wrong firmware or interrupted the Orbi firmware update process in between.
Solution: So, the only way to fix this type of issue is to reset your Netgear Orbi. Doing so will bring your Netgear Orbi back to its factory default settings. Once the reset process is successfully completed, you can perform Orbi firmware update in a correct manner.
Note: Further in this article, we will provide you the instructions to reset Orbi.
Reason 3: Hurdles in the Way of Orbi
Hurdles in the Orbi’s network pathway is one of the topmost reasons behind the “Netgear Orbi keeps disconnecting” issue.
Solution: Keep your Netgear Orbi at the center-most area in your home. Apart from this, it is also suggested that you keep your Orbi device away from microwaves, Bluetooth speakers, baby monitors, gaming consoles, smart HDTV, treadmills, and so on.
Reason 4: Connectivity Issues
If your Orbi device isn’t placed within reach of your existing modem, then also it (Orbi) will keep on disconnecting.
Solution: To make the most out of your Netgear Orbi, place it within reach of your modem.
Now, it’s time to check the connectivity between your devices and to see whether your Orbi device is still disconnecting or not. Have access to the orbi login page. If it loads up quickly, then it is fine. And, if the displayed page you are not connected to the Orbi’s WiFi, then it means that the issue still exists.
Don’t worry! The article hasn’t ended yet! If your Netgear Orbi is still disconnecting, then ensure that you have configured it properly.
Reason 5: Improper Orbi Setup
If your Netgear Orbi isn’t configured properly, then also it will keep on disconnecting.
To get a relevant fix for this issue, just ensure that the configuration process of your Netgear device is initiated and completed successfully. And, in case, you are not sure about the same, then reset your device, and reconfigure your Netgear Orbi.
Note: As we have mentioned that further in this article we will the steps to reset Orbi. Remembered? So, scroll down a little to grab the Netgear Orbi reset steps.
One more thing we would like to share! The reset process will work in following scenarios:
- You haven’t setup Orbi in a proper way
- Or you have performed orbi firmware update process in a incorrectly or interrupted it
- And, most importantly you have forgotten or lost the Netgear Orbi login details
Also Read: Full Guide to Fix Nighthawk Router Keeps Disconnecting Issue
Reset Netgear Orbi
Step 1: First of all, disconnect your Netgear Orbi and modem. Keep the Orbi device plugged in.
Step 2: Press the Orbi reset hole using a toothpick, pin, or paper clip.
Step 3: Hold and release the reset hole.
The blinking power LED indicates that your Orbi resets successfully.
Also Read: An Accurate Guide to Resolve Netgear Extender Red Light Issue
To Conclude
After resetting, you can reconfigure your Netgear Orbi and start enjoying the internet from any corner of your house.
Anticipating that the troubleshooting tips provided in this article has helped your Netgear Orbi from disconnecting. Please share your feedback!