You can have immaculate internet connectivity in every nook and cranny of your home with the assistance of routers manufactured by Linksys. When you have finished configuring the Linksys router, you will have WiFi coverage throughout the entirety of your home. However, users are sometimes confronted with the “Linksys router blinking orange” problem, which manifests itself most noticeably when they attempt to visit the Linksys router login page.
Here is the rescue strategy for you, if you are also in the same boat. In this article, you will learn several troubleshooting strategies to eliminate the issue where the light on the Linksys router continues to be orange. Keep reading.
Fix: Linksys Router Blinking Orange
1. Problems with the Connectivity of the Router
If the orange light on the Linksys router is blinking rapidly, it usually means that the router is unable to form a connection with the access point.
Solution: In such a scenario, you will need to restart your Linksys router in order to fix the issue. The following are the necessary steps:
• Disconnect all of the devices that are currently linked to your Linksys router.
• Make sure the power is off.
• Let it take a rest for some while.
• Give it another shot at connecting to the modem.
When you are finished, check to see what the LED light on your Linksys router is showing.
2. Update Firmware
If you have been neglecting the Linksys router firmware, it may lead to some sort of error or bug. For this reason, it is very necessary to get the firmware on your Linksys router up to the most recent version.
Make sure the firmware on your Linksys router is up to date. If it is out of date, you can bring it up to date by following the methods described below:
• Turn on your Linksys router after you have connected it to an electrical outlet and powered it on.
• Make sure an Ethernet cable is used to connect it to your modem.
• Now power on your desktop or laptop computer.
• Open a browser and type myrouter.local into the address bar.
• In the spaces provided, enter the username and password for the account.
• To sign in, click the icon labeled “Login.”
• Once you have successfully logged in, navigate to the Firmware Update button and click it.
• To begin the upgrade process, click the Start Upgrade button if there is a new firmware update available.
• Stay patient until the firmware on your router has been updated correctly.
You may get the firmware on your Linksys router up to the most recent version by following these steps. If the flickering orange light is still present on your device, continue to the next troubleshooting advice.
3. Perform a factory reset on your Linksys router
Even after restarting the router and installing the latest firmware, you may still see the orange light flickering. If this is the case, you should think about performing a factory reset as a final resort.
When you perform a factory reset on your Linksys router, all of the personalized settings will be removed. Be careful to create a backup of all of the customized settings before performing the factory reset, and then you’ll be able to quickly go back to the way things were.
Performing a factory reset on your Linksys router can be done as follows:
• Before anything else, be sure that your Linksys router is turned on.
• Verify that the device is getting a steady supply of electricity from the wall socket and that this is working properly.
• Locate the button labeled “Factory Reset.”
• Once it has been located, you will need to push the Reset button using a device similar to a paper clip or a pin.
• Allow the router to restart on its own.
After you have completed the process of resetting your router to its factory settings, you should think about configuring it again by going to the myrouter.local login page.
We hope that the solutions that were presented above have been of use to you in resolving the problem with the Linksys router blinking orange.