Commercial wood décor pieces are in great demand for people who own small businesses. It is no longer a secret that people are always looking for products to beautify their homes or offices. If you are planning to start your business, it will be an added advantage to learn how to make your wooden décor pieces. This guide will help you know the right steps in making good-quality commercial pieces out of pallet woods.
Source of Raw Materials
The first thing you need to do is the source of raw materials. They should be high-quality and finished timber planks, plywood sheets, etc. The supplies may come from manufacturers or suppliers that sell DIY items at cheap rates. The suppliers usually get these supplies directly from manufacturers to pass on the cost savings to their customers.
Moreover, always choose a reliable supplier for tools like Corded jigsaws by friday rack and others. It will help you gain perfection and more prominent results.
Buy Pallet Woods
One of the most important things you must do when buying pallet woods is to ensure they are not treated with hazardous chemicals, such as insecticides and pesticides. You can also seek advice from your supplier regarding what treatments have been done on the planks before they were supplied. Then, if they are raw, untreated planks, they will be safe for making any wood décor pieces.
Make Attractive Designs
Designing the decor piece is your personal choice, and you can choose from a vast variety of designs available. For example, some people might want to make wood plaques with the family names, while others may wish to deck up their homes with art pieces and sculptures. You can also try making small birdhouses or other wooden décor pieces that will double up as unique gifts for special occasions.
Right Tools for Pallet Wood Crafting
You must ensure you have all the right tools before starting on this woodworking project, such as sandpaper, drill machine, stapler gun, and so on. The cost of these tools is not very high, and one may already own some of these tools at home. With these simple tools in your tool kit, you can start this project right away.
Cut Materials into Smaller Sections
Once you’ve collected the required supplies, cut them into smaller sections using a jigsaw or band saw. The pieces should be of standard sizes- three feet long by six inches wide by one inch thick or half an inch thinner than the desired finished thickness level.
Make Holes at Both Ends
The next step is to make holes at both ends of all the pieces. The holes should be standard size, such as one-eighth of an inch in diameter. These will hold the pieces together when they are being glued.
Start Sanding Them
After all the pieces have been cut and drilled, it is time to start sending them. Start with coarse-grit sandpaper and work your way up to a finer grit. This will ensure that the finished product is smooth and free of splinters or rough patches.
Next, take the pieces to your workbench and assemble them using wood glue. Apply a thin layer of glue to one end of each piece and then fit them together like a puzzle. Once all the pieces are in place, use clamps to hold them in place and let the glue dry.
Wipe Off Excess Glue
Wipe off any excess glue using a damp cloth as soon as possible. The longer the glue sits before it is wiped away, the more difficult it will remove.
Sand It Smooth Again
Once the glue has dried completely, take your orbital sander and sand it smooth again. This time you can use finer-grit sandpaper than before so that it becomes easier to rub away any remaining rough patches of wood. Achieving a mirror-like finish takes some practice, but it does become easier over time with enough patience and perseverance. Keep wiping off dust frequently so that you don’t end up with unsightly smudges on your beautiful work of art.
Apply a Finishing Coat
After sanding it down, you will want to apply a finishing coat to seal in the wood’s natural beauty and protect it from wear and tear. Choose a sealant or finish that is appropriate for the type of wood you are using – there are many different types of finishes available on the market these days, so take your time in choosing the right one. Follow the manufacturer’s instructions carefully when applying the sealant, making sure to cover all surfaces evenly. Let it dry completely before moving on to the next step.
Add Hanging Hardware
Now comes the fun part – adding some hanging hardware so that you can proudly display your beautiful creation! Decide where you want to hang your piece and measure the distance between the two points. Add this measurement to the width and height of your wood décor piece, then purchase a hanging kit that is appropriate for the weight of your creation.
Enjoy Your Creation!
Now that you have finished your wood décor piece, it’s time to enjoy it! Display it proudly in your home and admire all of the work you put into it. This is a great piece to pass down from one generation to the next – your children and grandchildren will love seeing something handcrafted by you!
Fridayrack is one of the most reliable and trusted platform where you will find information about these power tools and information blog about these woodcrafts. If you want to know more about Fridayrack, visit their website and get fruitful information for your work.
Tips & Warnings
Always test the finish on a hidden spot before using it over the entire wood décor piece. Sometimes, especially with stains, there can be unexpected results that may require sanding and re-staining.
To create a weatherized shellac finish, thin out 2 ounces of clear sealer with 1 ounce of denatured alcohol or mineral spirits. Apply four thin coats, sanding between each one with 320-grit sandpaper until the surface feels perfectly smooth to the touch. Buff off any dust marks with a lint-free cloth.
If you want to make a beautiful yet inexpensive wood décor piece to give as a gift or to sell at a craft fair, read on. This guide will show you how to make a simple yet stunning wooden tray with a rustic finish.
While concluding this blog, we can say that wood-crafting and decor creation is not an easy job to do. You need to take several things in your consideration. But if you want to do it, go for it and give your best. With a little bit of practice, you will be able to make beautiful pieces of décor for your home or for selling purposes. So, get started with the basic steps we have mentioned above and enjoy this creative process.