If your D-Link wireless range extender is refusing to connect to the internet, it might be because of the following reasons:
- You haven’t updated the firmware of your extender via http //dlinkap.local.
- The Ethernet connection between the D-Link wireless extender and your home router is not secure.
- There is some fault from the end of your ISP.
- The signals of either your extender or router are getting interrupted.
- Technical glitches can also stop your device from connecting to the internet.
- Your D-Link wireless extender is placed far from your home router.
Now that you are well aware of the reasons why you are experiencing the D-Link extender not connecting to internet issue, follow the troubleshooting hacks given below to put an end to it.
Fixed: D-Link Extender Not Connecting to Internet
- Reboot Your D-Link Extender
Before you try any other troubleshooting hack, reboot your D-Link wireless range extender. It is one of the easiest ways to get rid of technical issues.
Follow the instructions mentioned below and learn how to give your D-Link extender a fresh start:
- Disconnect your client devices connected to the network of the extender.
- Power off your D-Link extender and unplug it from its wall socket.
- Wait for some time.
- Thereafter, plug your D-Link extender back into the wall socket and turn it on.
- Reconnect your client devices to the network of the extender.
Now, check whether you are able to get rid of the D-Link extender not connecting to internet issue. If not, continue reading.
- Verify the Ethernet Connection
Perhaps, the connection between your D-Link wireless range extender and home router is not stable. That might be because a damaged Ethernet cable is connecting them. To troubleshoot the issue, it is recommended that you get the cable you are currently using replaced with a new one or connect your devices wirelessly.
- Bring Your Devices Closer
Apart from ensuring a stable Ethernet connection between your D-Link wireless range extender and your home router, make sure that the distance between them is not too much.
Therefore, unplug your D-Link extender from the wall socket it is currently plugged into and plug it into the one located near your router.
- Avoid WiFi Interference
While performing D Link WiFi extender setup, did you not pay attention to where you’re placing your device? Well, that it exactly what you should not have done.
In order to rectify your mistake, you need to change the location of your wireless extender. While doing so, make sure that it is not placed near the following things:
- Cordless phones
- Washing machines
- Baby monitors
- Bluetooth speakers
- Fish tanks
- Microwave ovens
- Aluminum studs
- Concrete walls
Also, do not place your D-Link WiFi range extender near utensils containing water.
- Contact Your Internet Service Provider
As mentioned earlier, maybe your Internet Service Provider is not doing his job properly. If he was, you wouldn’t be struggling with the D-Link extender not connecting to internet issue. Therefore, get in touch with your ISP and give him a deadline to get the issue resolved.
- Reset Your D-Link Extender
Did none of the aforementioned troubleshooting hacks help you get rid of the issue you were facing? Well, in that case, it is high time you perform D-Link extender factory default reset.
Here is how you can restore your D-Link range extender to the default mode:
- Look for the Reset button on your D-Link extender.
- Get hold of a sharp object and press the Reset button using it.
- Wait for a couple of seconds.
Once done, it is recommended that you perform D-Link extender setup from scratch.
Also Read: Detailed Guide to Perform D-Link Extender Firmware Update
Our guide to troubleshoot the D-Link extender not connecting to internet issue has come to an end here. We hope that after following the hacks mentioned above, you will be able to fix the issue you were facing with your device.
Note: The aforementioned troubleshooting tips are also beneficial if you are experiencing the dlinkrouter.local not working issue with your D-Link router.